Basic network settings, Upgrade, Device information – LevelOne FCS-1030 User Manual
Page 20
- 12 -
Basic Network Settings
You can setup the network setting by this page. Usually this is no need to be changed, if you do
change it please make sure you input the correct setting or the device may not be reachable.
Upgrade
When you select one device or multiple devices (of the same model), the “Upgrade” button will
be enabled. Click on it to upgrade the firmware of the selected device(s). After click on the
“Upgrade” button, Installation Wizard will try to connect the selected device(s). If the
authentication is failed, it will popup a dialog to ask for the correct password and http port number.
Device Information
After connected to the selected device, it will display.
Note: The default password is the MAC address with capital letter.