Battery installation – Lenoxx Electronics 820M User Manual

Page 2

Advertising
background image

IB-820M(B)-WM-E-050703

NOTE:

•

Remove the batteries during long periods (about 30 days or

more) of nonuse, possible battery leakage and corrosion can

damage the set.

•

If the sound becomes weak and unclear, the batteries may be

weak. Replace both batteries at once.

TO INSERT THE TAPE

1. Open the CASSETTE DOOR by holding the door as shown

and gently pulling it to you.

2. Insert the tape into the cassette holder ON THE DOOR.

3. Close the CASSETTE DOOR gently till it clicks shut.

CAUTION: Do not pull door too strongly or you may damage

the door, treat this set with care and it will last a long

time.

--- 2 ---

BATTERY INSTALLATION

Slide the BATTERY DOOR in the direction shown by the arrow

to open the door and insert 2 “AA” batteries, taking care not to

reverse the positive and negative polarities.

Alkaline batteries are

recommended and will

normally provide more playing

time.

•

Do not mix old and new batteries.

•

Do not mix alkaline, standard (carbon-zinc) or rechargeable

(nickel-cadmium) batteries.

20M(CR)-WM-E-050703.p65

5/9/03, 12:01 AM

2

Advertising