Lowrance electronic Lowrance iWAY 500C - Manual (Page 14)

8
1. Right-click the iWAY drive letter. (This can be found by first double-
clicking the "My Computer" icon on the Windows desktop.)
2. If the file is still copying (or another file operation is under way), you
will see the standard Windows hourglass symbol. This indicates the
unit's hard drive is still active. When the hourglass disappears, the file
has finished copying. Unplug the USB cable and resume other tasks.
3. If you right-click the reader's drive letter and instead of the hour-
glass symbol a pop-up menu appears, click
E
JECT
.
A. If no "wait" or warning message appears, unplug the USB cable
and resume other tasks.
B. If a "wait" message appears, follow the directions and give the unit
a few moments to finish the file operation, then repeat the Eject com-
mand. If no other message appears, unplug the USB cable.
C. If you click
E JECT
and a "Cannot Unmount Volume" message ap-
pears, click C
ONTINUE
. You can now safely unplug the USB cable.
Cannot Unmount Volume message. This may appear when trying to
Eject the iWAY while using Windows 2000 operating systems.
Remember: No matter what computer operating system you are using,
you must always wait until any file operation is finished before you dis-
connect the USB cable. If you have questions, refer to your computer
operating system instructions to determine the completion indicators
for various file operations.
Attach the USB-to-PC cable to the back of the iWAY as shown.
The cable's other connector plugs into any free USB port on your PC.