Lantronix Data Center-Grade Evolution Device Server EDS32PR - Manual (Page 109)

10: Maintenance and Diagnostics Settings
EDS Device Servers User Guide 109
System Page
System Page
Settings Description
Reboot Device Click the Reboot button to reboot the EDS. When the EDS reboots,
refresh your Web browser and redirect it to the IP address for the
EDS.
Restore Factory
Defaults Click the Factory Defaults button to return the EDS to its factory-
default configuration. Appendix C identifies the factory-default
configuration. If you restore the factory default configuration, the
EDS reboots automatically.
Upload New
Firmware Lets you update the EDS firmware. Do not power off or reset the
EDS while uploading new firmware. Once the upload has completed
and the new firmware has been verified and flashed, the EDS
reboots automatically.
Name Enter the short name and long name for the EDS. Default short
name is EDS and default long name is Lantronix EDS.
Change Time
Settings Lets you specify the system time zone, date, and time. After
changing any of these settings, click the Submit button next to the
field to accept the change.
Query Port Page
Clicking the Query Port link in the menu bar displays the Query Port page. This page
displays statistics and current usage information about the query port server. The query
port server is an application that only responds to auto-discovery messages on port
0x77FE. It is used when DeviceInstaller is used to discover the EDS automatically.