Lantronix Data Center-Grade Evolution Device Server EDS32PR - Manual (Page 72)

8: Services Settings
EDS Device Servers User Guide 72
SNMP Page
SNMP Page Settings Description
SNMP Agent Select whether SNMP is enabled. Choices are:
On = SNMP is enabled. (default)
Off = SNMP is disabled.
Read Community Enter the case-sensitive community name from which the
EDS will receive trap messages. Default is public. For
security, the read community name displays as <Configured>
to show that one is enabled.
Write Community Enter the case-sensitive community name to which the EDS
will send trap messages. Default is private. For security, the
write community name displays as <Configured> to show that
one is enabled.
System Contact Enter the name of the system contact. Default is <None>.
System Name Enter the EDS’s name.
System Description Enter a system description for the EDS.
System Location Enter the geographic location of the EDS. Default is <None>.
Enable Traps Select whether SNMP cold start trap messages are enabled
at boot. Choices are:
On = SNMP cold start trap messages are enabled at boot
time. (default)
Off = SNMP traps are disabled.
Primary TrapDest IP Enter the primary SNMP trap host. Default is <None>.
Secondary TrapDest IP Enter the secondary SNMP trap host. Default is <None>.
FTP Page
Clicking the FTP link in the menu bar displays the FTP page. This page displays the
current File Transfer Protocol (FTP) connection status and various statistics about the
FTP server.
Under Current FTP Configuration and Statistics, FTP Password has a Reset link that
lets you reset the FTP password. If you click this link, a message asks whether you are
sure you want to reset this information. Click OK to proceed or Cancel to cancel the
operation.