Lenoxx Electronics PH-318 - Manual (Page 8)

TELEPHONE OPERATION
RECEIVING CALLS AS A NORMAL TELEPHONE
When your telephone rings
1. Lift the Handset and speak into the mouth piece of the Handset.
2. Hang up the Handset to release the telephone line when conversation is completed.
MAKING CALLS AS A NORMAL TELEPHONE
1. Select the desired dialing mode with the Tone/Pulse Switch (do this only the first
time after installation).
2. Pick up the Handset and listen for dial tone.
3. Dial your call.
To switch the conversation from speakerphone to private, simply lift the Handset.
If you start your conversation with the Handset and you want to switch to speaker-
phone, press the Speakerphone Button and replace Handset. Remember to hang up
by pressing the Speakerphone Button again.
7
ANSWERING CALLS WITH SPEAKERPHONE (HANDS-FREE ANSWERING)
When the phone rings, press the Speakerphone Button, it is not necessary to lift the
Handset.
Adjust the Volume Control on the side of the phone.
When you finished the conversation, press Speakerphone Button again.
MAKING CALLS WITH SPEAKERPHONE
1. Select the desired dialing mode with the Tone/Pulse Switch (do this only the first
time after installation).
2. Press the Speakerphone button to get dial tone - no need to lift the Handset.
3. Adjust the Volume Control on the side of the phone.
4. Dial your call.
5. To hang up, press Speakerphone Button again.
NOTE : When using the phone for the first time after installation, before using
speakerphone pick up the handset first.
REDIAL BUTTON
The last number you called can be redialed using the speakerphone or the normal
telephone. This is useful especially when the line is busy.
1. Get a new dial tone and press the Redial Button.
2. To get a new dial tone, press the Flash Button or hang up the phone for 2
seconds. Then press the Redial Button. This phone will remember the last
number dialed even overnight. If you do not want anyone to know which number
you dialed, pick up the phone and press any number.
HOLD BUTTON
You may use this button to temporarily HOLD the line. Pressing the Hold Button will
light the HOLD Lamp. When HOLD is on, the other party cannot hear your
conversation.
Picking up the Handset or press Speakerphone on this phone or any phone on the
same line will stop the hold function.
NOTE 1: Be sure to notify the other party that you are using the speakerphone mode,
the other party may not wish anyone else to hear the conversation.
NOTE 2: Adjust the Speakerphone Volume Control to the desired sound level while
the other party is talking. If a squealing or whistling sound is heard, reduce
the speakerphone volume setting.
PH-318120499 MS V.3 E