Lyngdorf Audio CD-1 - Manual (Page 9)

- 9 -
A-B Repeat mode is indicated in the lower left-hand corner of the display. When [A] time
has been set and CD-1 is waiting for [B] time, the symbol “A ” will be displayed. Once [B]
time has been selected and the CD-1 is playing in A-B Repeat mode, the symbol will be
changed to “AB”.
Random Play mode
When the ‘Random’ button is pressed on the remote control or Random mode is activated
in the menu, the Random Play mode is entered and CD-1 creates a random play list. This
starts playing from the list instead of playing the tracks in numeric order. If a track has
already been selected or a track is playing, this track will automatically become the first in
the random play list so no new track is selected by enabling Random Play mode.
Using the number buttons on the remote control to select a specific track number, the
Random Play mode will cause the CD-1 to create a new play list with the selected track as
the first. The CD-1 will then start playing this track.
Using the skip wheel (11 & 12) on the front panel or the Skip/Scan |<< / >>| buttons during
Random Play mode will skip to the previous or next track in the random play list. The skip
functions will not skip past the beginning or end of this play list unless Repeat All is
selected, then the next and previous functions will loop around at the beginning or end of
the play list.
Selecting Repeat All during Random Play mode will repeat the random play list after the
last track in the list. The play list is not affected.
Selecting Repeat One during Random Play mode will repeat the current track playing
without affecting the play list.
If the Stop button is pressed during Random play mode, a new random play list will be
generated when Play mode is entered again.
Turning Random Play mode off and on again will cause the CD-1 to generate a new
random play list.
Repeat mode
Selecting Repeat mode will allow the CD-1 to skip to the first track again when the end of
the last track is reached.
Repeat One mode
Selecting Repeat One mode will allow the CD-1 to restart playing the track when the end
of that track is reached.