Linksys WVC11B - Manual (Page 14)

7 Chapter 3: Getting to Know the Wireless-B Internet Video Camera
Camera Ports
Wireless-B Internet Video Camera
Camera Ports
The Camera features two ports and a Reset button on the bottom panel.
Power The Power port is where you will connect the power adapter.
LAN The LAN port is where you will connect the Ethernet network cable.
(Reset) The Reset button is what you will press if you need to reset the Camera. Insert a paper clip
into the opening next to the LAN port. Then press the button and hold it in for five seconds.
Figure 3-3: Camera Ports
Important: Resetting the Camera will erase all
of your settings, such as WEP encryption
information, and replace them with the factory
defaults. Do not reset the Camera if you want
to retain these settings.