Linksys WVC11B - Manual (Page 58)

51 Chapter 8: Using The Wireless-B Internet Video Camera’s Web-based Utility
Setup
Wireless-B Internet Video Camera
Advanced
The Advanced screen allows you to alter the Camera’s e-mail alert features and UPnP configuration.
Options
You can choose to be notified when the Camera detects motion in its video. You will be sent an e-mail with video
attached.
E-mail Alert. If you want to be notified by e-mail when the Camera detects motion, then click the checkbox.
Motion Sensitivity. You have a choice of motion sensitivity levels for the Camera. The distances at which the
Camera will detect motion will vary depending on the conditions of your specific environment. Select the
appropriate level from the drop-down menu.
Specify how long you want the video attachment to be, up to a maximum of 5 seconds. Then specify the minimum
time interval between e-mail alerts.
Send to. Enter the e-mail address that will receive e-mail alerts.
Show “From” as. Enter the text that you want displayed in the “From” field of any e-mail alert message.
Subject. Enter the subject heading that you want to be used.
Outgoing Mail SMTP Server. Enter the IP address of the outgoing mail SMTP server. If it requires authentication,
click the checkbox, and enter the account name and password in the Account Name and Password fields.
UPnP
When enabled, the Camera’s Universal Plug and Play (UPnP) feature allows a UPnP-enabled computer to easily
detect the Camera.
UPnP. The Camera’s UPnP feature is disabled by default. If your computer is UPnP-enabled, then click the
checkbox next to Enable UPnP.
Alternate Port. If you want the Camera to be able to use an alternate port for communications, click the
checkbox. Then enter the port number you want in the Port Number field.
To save your changes, click the Apply button. To cancel any unsaved changes, click the Cancel button. To get
additional information about the screen’s features, click the Help button.
Figure 8-17: Advanced