Programming – Lennox International Inc. 43558 User Manual
Page 10
18
18
PROGRAMMING
Option Menu
Your thermostat has many settings that can be adjusted to fit your system and preferences.
■ Press to enter the Option Menu and to change to the next option selection.
■ Press at any time to return to normal mode.
Local temperature sensor weighting
■
or
to change weighting between FULL,
HALF or OFF.
Remote temperature sensor 1 weighting
■
or
to change weighting between FULL, HALF or
OFF. The factory default is “HALF.” The current temperature measure-
ment from sensor 1 is shown. (Blank if not connected.)
option
ret-clear
option
1
Local
Temp
option
2
Reamote-1
Temp
41653_model43558.pmd
19
Remote temperature sensor 2 weighting
■
or
to change weighting between FULL, HALF or
OFF. The factory default is “HALF.” The current temperature measure-
ment from sensor 2 is shown. (Blank if not corrected.)
NOTE:
Refer to the Remote Sensors section on pages 51-53 for more information on sensor weightings.
Fahrenheit or Celsius (F
°
/C
°
) selection
■
or
to change the thermostat display between
Fahrenheit and Celsius.
12 Hr or 24 Hr. Clock selection
■
or
to change the time format display between
12 hour (AM / PM) and 24 hour (military).
option
3
Remote-2
Temp
option
4
Te m p
option
5
C l o c k
(continued)