Lindy ATA-133 - Manual (Page 7)

- 7 -
1. After computer restarts, insert floppy disk in floppy disk drive.
2. Double-click on My Computer.
3. Double-click on 3 1/2 Floppy [A:].
4. Double-click on InstallSiIConfig.exe.
5. Follow on-screen instructions to complete installation. Note: Do NOT install
in the Start Up folder. Choose the Default folder (normally Accessories or
Administrative Tools or something similar).
Windows XP Operating System
After the board has been properly installed, when the computer is powered
on, the OS will automatically search for new devices. When the new board is
found, a window will appear asking Found New Hardware Wizard.
Select install from a list or specific location[Advanced], click Next, and select
search for a suitable driver for my device [recommend] click next, select
specify a location click next, insert the floppy disk into the floppy disk drive
and click Browse.
Most floppy disk drives are configured as [A:]. Choose the [A:] drive in your
browser and the PnP680r.sys file for the SiI 0680 or PnP649r.sys file for the
SiI 0649 should appear. Select the file and click Open:
Verify that the directly listed in this window is A: and click OK then click next.
Now, a window verifying that the new Driver for the board has been properly
installed. Click Finish.
To install Medley, use Windows InstallShield by performing the following:
1. After computer restarts, insert floppy disk in floppy disk drive.
2. Double-click on My Computer.
3. Double-click on 3 1/2 Floppy [A:].
4. Double-click on Install SiIConfig.exe.
5. Follow on-screen instructions to complete installation. Note: Do NOT
install in the Start Up folder. Choose the Default folder (normally Accessories
or Administrative Tools or something similar).