Linksys DMRW1000 - Manual (Page 14)

Setting Up Your Controller
7 Controller/Wireless-N Touchscreen Remote
Wireless Home Audio
Charging the Battery
The Controller includes two charging options. One
connects the Controller to the computer to charge and
the other connects to a standard power outlet.
Charging with the Power Adapter
Connect the power adapter to a power outlet. 1.
Connect the other end with the mini-USB connector 2.
to the Controller.
Charging with the USB Cable
Connect the end of the USB Cable with the mini-USB 1.
connector to the Controller.
Connect the other end of the USB Cable to a powered 2.
USB slot.
Battery Status The battery status icon will
indicate the power remaining on the battery.
A message will appear when the battery
power is low.
Battery Charging When the battery is
plugged into a power source and charging,
this icon will be displayed in the upper left
corner of the LCD touchscreen.
Connecting to the Network
Navigate to 1. Settings and select it.
Select 2. Wireless Settings.
Go to 3. Select Network.
Select the wireless connection to use from the list of 4.
available wireless connections.