Lexmark 4600MFP - Manual (Page 117)

Attendance messages
117
Understanding MFP messages
291.00 Scanner jam,
remove all originals
from the scanner The scanner detects an original
document jam at the second scanning
sensor while the scanner is idle.
Job level recovery is active. Clear the jam from the scanner to clear the
message.
291.00 Scanner jam,
remove jammed originals
from the scanner The scanner detects an original
document jam at the second scanning
sensor while the scanner is idle.
Page level recovery is active. Clear the jam from the scanner to clear the
message.
291.01 Scanner jam,
remove all originals
from the scanner The scanner detects an original
document jam at the first scanning
sensor.
Job level recovery is active. Clear the jam from the scanner to clear the
message.
291.01 Scanner jam,
remove jammed originals
from the scanner The scanner detects an original
document jam at the first scanning
sensor.
Page level recovery is active. Clear the jam from the scanner to clear the
message.
291.02 Scanner jam,
remove all originals
from the scanner The scanner detects an original
document jam at the second scanning
sensor.
Job level recovery is active. Remove all original documents from the
scanner to clear the jam. The message clears.
291.02 Scanner jam,
remove jammed originals
from the scanner The scanner detects an original
document jam at the second scanning
sensor.
Page level recovery is active. Remove all original documents from the
scanner to clear the jam. The message clears.
292 Scanner jam, remove
all originals from the
scanner The ADF cover is open while the ADF
is feeding the original document.
Job level recovery is active. Remove all original documents from the
scanner to clear the jam. The message clears.
292 Scanner jam, remove
jammed originals from
the scanner The ADF cover is open while the ADF
is feeding the original document.
Page level recovery is active. Remove all original documents from the
scanner to clear the jam. The message clears.
293 Replace all
originals if restarting
job. The MFP receives a scan job;
however, there is no original
document in the ADF.
Job level recovery is active. Touch Continue if no scan job is active when
the attendance message appears. This clears
the message.
Touch
Cancel Job if a scan job is processing
when the attendance message appears. This
cancels the job and clears the message.
Touch
Scan from Automatic Document Feeder
if the page jam recovery is active. Scanning
resumes from the ADF immediately after the
last successfully scanned page.
Touch
Scan from flatbed if page jam recovery is
active. Scanning resumes from the flatbed
immediately after the last successfully scanned
page.
Touch
Finish job without further scanning if
page jam recovery is active. The job ends at the
last successfully scanned page, but the job is
not canceled. Successfully scanned pages go
to their destination: copy, fax, e-mail, or FTP.
Touch
Restart job if job recovery is active and
the job is restartable. The message clears. A
new scan job containing the same parameters
as the previous job starts.
293 Replace jammed
originals if restarting
job. The MFP receives a scan job;
however, there is no original
document in the ADF.
Page level recovery is active.
Message Meaning Action