Lexmark 4600MFP - Manual (Page 42)

Network/Ports
42
Using the MFP menus
NetWare
Use these menu items to view or change the printer NetWare settings.
Honor DSR Determines whether the MFP uses
the Data Set Ready (DSR) signal.
DSR is one of the handshaking
signals for most serial interface
cables.
The serial interface uses DSR to
distinguish data sent by the
computer from data created by
electrical noise in the serial cable.
This electrical noise can cause stray
characters to print. Select
On to
prevent stray characters from
printing.
Off* All data received by the serial port is
treated as valid data.
On Only data received while the DSR
signal is high is treated as valid.
Menu item Purpose Values and descriptions
View Login
Name Shows the field used to assign the
NetWare login name. text entry
Enter the Login Name. Thereafter, select
Login Name to show
the NetWare name on the control panel.
View Print Mode Assigns the NetWare print mode. Pserver*
Rprinter
View Network
Number Shows the field used to assign the
NetWare number. text entry
Enter the Netware number. Thereafter, select
View Network
Number to show the NetWare network number on the control
panel.
Activate Activates or deactivates the
NetWare feature. Off
On* Off–Deactivates the NetWare feature.
On–Activates the NetWare feature.
Ethernet 802.2 Sets the Ethernet 802.2 value On or
Off. On*
Off IPX Frame Types, which allow the
adapter to initiate conversations, are
used.
Ethernet 802.3 Sets the Ethernet 802.3 value On or
Off. On*
Off
Ethernet Type II Sets the Ethernet Type II value On
or Off. On*
Off
Ethernet SNAP Sets the Ethernet SNAP value On
or Off. On*
Off
Packet Burst Sets the Packet Burst value On or
Off. On
Off*
NSQ/GSQ Mode Sets the NSQ/GSQ Mode value On
or Off. On
Off* This is the broadcast search method
on the Web pages.
Menu item Purpose Values and descriptions