Linksys PPS1UW - Manual (Page 18)

29
Click the Logical Printers tab to view or change the logical printer settings of
the PrintServer.
For each Logical Printer, the following fields are available:
Logical Printer(Port) - Select the Logical Printer Port you wish to configure.
(L1 to L8). Click the Get Data button to update the display with the current
data for the selected logical printer.
Port - Select the Printer Port which the Logical printer will use.
Pre-string - The printer control string (in hex) to be sent to the printer before
each print job. This string cannot exceed 30 characters.
Post String - The printer control string (in hex) to be sent to the printer after
each print job. This string cannot exceed 30 characters.
Convert LF to CR+LF - If checked, LF (line feed) characters are changed to
CR+LF (carriage return + line feed).
If you make any mistakes, you can simply hit the Cancel button to exit the
screen without making any changes. Once you are certain of any changes you
have made, click the Save button to implement the changes.
The Logical Printers Page
EtherFast ® Wireless-Ready USB PrintServer
Click the Internet Printing tab
to view or change the Internet
Printing values of the
PrintServer.
Internet Printing allows you to
automatically print any e-mails
that are sent to a specific e-mail
account on your network. This is
especially useful for printing
information when you are not
connected to the network. You
can print from anywhere that
you can access e-mail.
The Mail Server IP Address is
where you will enter the address of your mail server. (This value must be a
fixed IP address.) The Account Name and Account Password must be
entered next. Enter the password again in the Verify Password field. Then,
enter the time interval for the PrintServer to check for e-mail to be printed, in
hours and minutes in the Check Mail every: field. You may even specify an
e-mail address to which mails that cannot be printed are routed; this is useful
for both graphic-intensive e-mails and for troubleshooting purposes. Enter this
e-mail address in the Redirect unprintable Mail to: field.
Under the Printer settings, enter the Printer Model in the box provided. You
can find this in the Device Manager. Then choose the Printer Port from the
drop down box.
Then, choose from the Options by placing a check mark next to your prefer-
ences. You can Print every E-Mail, choose to Print Banner Pages (default),
or Mail response when printed.
If you make any mistakes prior to saving, you can simply hit the Cancel but-
ton to exit the screen without making any changes. Once you are certain of
any changes you have made, click the Save button to implement the changes.
The Internet Printing Page
Note: Linksys does not provide any technical support for problems
with e-mail printing.
30
Instant EtherFast ® Series
Figure 7-2
Figure 7-3
Note: Linksys does not provide any technical support for logical print-
ers configuration.