Lincoln Electric IDEALARC DC-400 - Manual (Page 8)

A-1 INSTALLATION
IDEALARC® DC-400
A-1
TECHNICAL SPECIFICATIONS – DC-400
INPUT-THREE PHASE ONLY
RATED OUTPUT
HEIGHT WIDTH DEPTH WEIGHT
27.50 in. 22.25 in. 32.0 in. 473 lbs.
699 mm 565 mm 988 mm 215 kg.
OUTPUT
RECOMMENDED INPUT WIRE AND FUSE SIzES FOR MAXIMUM RATED OUTPUT.
IN ADDITION, FOLLOW LATEST NATIONAL ELECTRICAL CODE AND LOCAL CODE.
Duty Cycle (1) Amps Volts at Rated Amps
100% 400 36
60% 450 38
50% 500 40
PHYSICAL DIMENSIONS
(1) Based upon 10 minute time period (i.e., for 60% duty cycle, it is 6 minutes on an 4 minutes off).
*
Use only bussmann Super-Lag fuses specified. Other fuses may not protect the welder and may cause overheating and possible
fire damage.
Insulation class 155(F)
220/50/60Hz
230/50/60Hz
380/50/60Hz
400/50/60Hz
415/50/60Hz
440/50/60Hz 81
77
47
45
43
41 3(25)
3(25)
6(16)
6(16)
8(10)
8(10) 8(10)
8(10)
10(6)
10(6)
10(6)
10(6) 100 REN-100
100 REN-100
60 RES-60
60 RES-60
60 RES-60
50 RES-50
INPUT
VOLTAGE /
FREQUENCY
230/60Hz
460/60Hz
575/60Hz
INPUT AMPERE
RATING ON
NAMEPLATE
@100%
Duty Cycle
78
39
31
TYPE 75°C
COPPER WIRE IN
CONDUIT AWG
(IEC) SIZES (mm 2 )
40°C(104°F)
3(25)
8(10)
10(6)
TYPE 75°C
GROUND WIRE IN
CONDUIT AWG
(IEC) SIZES (mm 2 )
6(16)
10(6)
10(6)
BUSSMANN SUPER LAG
FUSE SIZE AND
CATALOG NUMBER *
FUSE SIZE CATALOG NUMBER
100 REN-100
50 RES-50
40 RES-40
Standard
Voltage
Frequency
230/460/575V/60Hz
220/230/380/400/415/440V/50/60Hz
100% Duty Cycle
400Amps/36V
78/39/31Amps
400Amps/36V
81/77/47/45/43/41Amps
60% Duty Cycle
450Amps/38V
83/41/33Amps
450Amps/38V
85/81/49/47/45/42Amps
50% Duty Cycle
500Amps/40V
84/42/34Amps
500Amps/40V
86/82/50/48/46/43Amps
Input Current at Rated Output (CVI)
OUTPUT MAXIMUM OPEN CIRCUIT VOLTAGE AUXILIARY POWER
Min.----60A 12V CV(22V CC) 57V. (CC) 45.5V. (CVI) 60Hz 115 VAC, 15 AMPS
Max.---500A 42V (CC, CV) 54V. (CC) 45.5V. (CVI) 50/60 Hz 42 VAC, 10 AMPS
TEMPERATURE RANGES
OPERATING TEMPERATURE RANGE
-22°F to 104°F(-30°C +40°C)
STORAGE TEMPERATURE RANGE
-40°F to 140°F(-40°C+60°C)