Pgm trigger assignment, Speaker configuration, Custom configuration – Lexicon DC-2 User Manual

Page 31: Front l/r, System configuration, Adjust with or small small dipole small small yes, 23 dc-2 digital controller

Advertising
background image

23

DC-2 Digital Controller

System

Configuration

Speaker
Configuration

Select LARGE for full-range front speakers to deliver full frequency re-
sponse to the front left and right outputs. Selecting SMALL activates a 12dB
per octave highpass filter and automatically routes low frequency informa-
tion to the subwoofer output. Choices of 40, 80 and 120 Hz are available for
the -3dB point. The SMALL setting is recommended unless your speakers
are capable of handling full audio signals, or are equipped with their own
crossovers.

SETUP MENU

INPUT CONFIG

SPEAKER CONFIG

OUTPUT LEVELS

LISTENER POSITION

LOCK SETTINGS

Front L/R

PGM Trigger Assignment

This menu item assigns the status for the programmable (PGM) trigger on
the DC-2 rear panel. +12VDC is provided for controlling ancillary equip-
ment or functions. Selections are ENABLE or DISABLE for the selected
input. The factory default is ENABLE (high) for A/V inputs and DISABLE
(low) for audio only inputs. (+5VDC is available via internal jumper.
Contact your dealer or Lexicon Customer Service to perform this change.)

TRIGGERS

TRIGGERS

GND

PGM

PWR

IR IN

PGM GND PWR

The Speaker Configuration menu allows a wide range of choices in speaker
type and room setups to provide optimal performance in almost any room.
An adjustable lowpass filter is available for the subwoofer, as well as a
highpass filter for all other speakers. The three selections are for CUSTOM,
THX or SURROUND EX configuration.

CUSTOM CONFIG MENU

FRONT L/R
CENTER
SIDES
REARS
SUBWFR

Adjust with or

SMALL
SMALL

DIPOLE SMALL

SMALL

YES

LARGE, SMALL

LARGE, SMALL, NONE

LG or SM STD, LG or SM DIPOLE, NONE

LARGE, SMALL, NONE

YES, NO

Custom Configuration

Press SELECT to open the CUSTOM CONFIG menu. Press SELECT to
access the selections for any highlighted menu item.

The high pass filter attenuates low fre-
quencies at 12dB per octave. The values
given are for the -3dB point.

10

100

50

20

2k

1k

500

200

5k

10k

dBr

Hz

0.0

-1.000

-2.000

-3.000

-4.000

-5.000

-6.000

-7.000

-8.000

-9.000

-10.00

-11.00

-12.00

-13.00

-14.00

-15.00

-16.00

-17.00

-18.00

SPEAKER SETUP MENU

CUSTOM CONFIG

THX CONFIG

SURROUND EX CONFIG

Advertising