Peration – Liebherr WU 40 User Manual

Page 11

Advertising
background image

11

O

PERATION

For = brightness, press /(UP/DOWN) button

to select

1

= minimum to

5

= maximum brightness and acknowledge with

fan button.

Figure 11

For = unit of temperature, press / (UP/

DOWN) button to select °C= to display degrees

Celsius, °F = to display degrees Fahrenheit for

temperature display and acknowledge with fan

button.

LBR070

Figure 12

Exit set-up mode:

• Exit the set-up mode by pressing the

ON/OFF

button; after two minutes the electronic system

switches over automatically. The normal operat-

ing mode is activated again.

Audible Warning Signal

- Figure 13

The audible warning signal helps to protect your

wines against excessive temperature

fluctuations.

- The audible warning signal sounds

when the door is open for longer

than about 60 seconds. The audi-

ble warning device is turned off by

pressing the

Alarm button.

- The audible warning signal sounds

when the interior gets too warm or

too cold. The temperature display

will also flash. The audible warn-

ing device is turned off by pressing the

Alarm

button. The temperature display will continue to

flash until the cause of the alarm has been recti-

fied.

Additional Functions

- Figures 9 - 12

In setup mode you can set the

Childproof Lock,

adjust the

brightness of the display and choose

the

unit of temperature for the display in degrees

Fahrenheit or degrees Celsius. The childproof lock

is designed to protect the appliance from being

switched off accidentally by children.

Activating set-up mode:

• Press the ventilation button for approximately

five seconds

- the fan button flashes - the display shows

C

for childproof lock.

Note: the value to be altered flashes.

Figure 9

• Select the required function by pressing the

/(UP/DOWN) button:

C

= Childproof Lock, = brightness

or

= changing the temperature display.

• Now select ON or OFF by pressing the ventila-

tion button briefly:

For

C

= childproof lock, press the /(UP/

DOWN) button to select

C 1

= childproof lock on or

C 0

= childproof lock off and acknowledge with

the fan button.

When the symbol

is lit, the childproof lock is

activated.

Figure 10

Figure 13

Advertising