Liebherr WU 40 - Manual (Page 9)

9
I
NSTALLATION
1. Unscrew hinge pin.
2. Lift off the door.
3. Unscrew the ventilation grille.
4. Pull out sleeve and reassemble.
5. Unscrew upper hinge plate, turn it 180° and screw
on the opposite side.
6. Unscrew lower hinge plate.
7. Remove screws.
Figure 4
To avoid injury from sharp edges, wear pro-
tective gloves before performing the follow-
ing steps.
To prevent possible injury from an electrical
shock, be sure to disconnect the power cord
or turn OFF the circuit breaker before per-
forming the following steps.
Reversing the Door Hinges
- Figure 4
11. Transfer plug to the opposite side of the door.
12. Suspend door on hinge pin and close.
13. Insert hinge pin and tighten.
14. Transfer handle and plugs to the opposite side.
15. Reassemble the ventilation grille.
8. Transfer both pins of the hinge plate to the oppo-
site side.
9. Insert screws again.
10. Reassemble lower hinge plate on the left side of
the unit.