Lincoln Electric MAGNUM IM632-B - Manual (Page 8)

MAGNUM® 450WC & 650WC
A-1 INSTALLATION A-1
Description
Gun Gas
Product Cable Wire Size Contact Tips Diffuser Gas Cable Gun Tube
Number Length (m) in. (mm) Assembly Nozzle Liner Angle
K684-11 10 ft. .035 (0.9) KP2067-1B2
(3.0) .045 (1.2) KP2067-5B1 KP2059-1 KP1957-4 KP44-3545-15 60°
K684-12 15 ft. .035 (0.9) KP2067-1B2
(4.5) .045 (1.2) KP2067-5B1 KP2059-1 KP1957-4 KP44-3545-15 60°
K684-13 10 ft. .052 (1.3) KP2067-6B1
(3.0) 1/16 (1.6) KP2067-7B1 KP2059-1 KP1957-4 KP44-116-15 60°
K684-14 15 ft. .052 (1.3) KP2067-6B1
(4.5) 1/16 (1.6) KP2067-7B1 KP2059-1 KP1957-4 KP44-116-15 60°
K684-15 10 ft. 1/16 (1.6) KP2067-7B1 KP2059-1 KP1957-4 KP44-564-15 60°
(3.0) 5/64 (2.0) KP2067-10B1
K684-16 15 ft. 1/16 (1.6) KP2067-7B1 KP2059-1 KP1957-4 KP44-564-15 60°
(4.5) 5/64 (2.0) KP2067-10B1
K684-17 10 ft. .035A (0.9A) KP2067-1B2 KP2059-1 KP1957-4 KP1958-5 45°
(3.0) .045A (1.2A) KP2067-5B1
K684-18 10 ft. 1/16A (1.6A) KP2067-7B1 KP2059-1 KP1957-4 KP1958-3 45°
(3.0)
TABLE A.1 – MAGNUM®™ 450WC AT 100% DUTY CYCLE WITH CO2 GAS
GENERAL DESCRIPTION
The MAGNUM®™ 450WC Water Cooled Gun is rated at 450 amperes 100% duty cycle using carbon dioxide
shielding gas and cooled with water at a flow rate of .58 gallons per minute (2.2 liters per minute). It is also rated
400 amperes 100% duty cycle with mixed argon shielding gases. There are several models of guns designed for
gas metal arc welding (GMAW) with .035-1/16 (.9mm-1.6mm) solid electrodes and gas shielded flux cored arc
welding (FCAW) with .045-5/64 (1.2 mm-2.0mm) cored electrodes. The gun tube angle is as shown in the table
below and the gun has a Fast-Mate™ wire feeder end connector. Two 10 ft. (3.5 M) guns with a 45 degree gun
tube angle are available for feeding .035-1/16 (.9mm-1.6mm) aluminum electrode. Optional liners are available
for feeding aluminum electrode with the 60 degree guns. See ACCESSORIES section for details.
The MAGNUM®™ 650 WC Water Cooled Gun is rated at 650 amperes 100% duty cycle using carbon dioxide
shielding gas and cooled with water at a flow rate of .58 gallons per minute (2.2 liters per minute). It is also rated
500 amperes 100% duty cycle with mixed argon shielding gases. The gun is designed for gas metal arc welding
(GMAW) with 5/64 and 3/32 gas shielded flux cored arc welding (FCAW). The gun tube angle is 60 degrees and
the gun has a Fast-Mate wire feeder end connector. Optional gas nozzles are available. See ACCESSORIES
section for details.
Description
Gun
Product Cable Wire Size Contact Tips Gas Gas Cable Gun Tube
Number Length (m) in. (mm) Diffuser Nozzle Liner Angle
K1637-1 15 ft. 5/64 (2.0) KP2067-10B1 KP1959-2 M19127-2 M19365-1 60°
(4.5)
TABLE A.2 – MAGNUM®™ 650WC AT 100% DUTY CYCLE WITH CO2 GAS