Land Pride Soil Pulverizer SP20 Series - Manual

24
www.landpride.com
Landscapers, nurseries and general contractors find our
20 and 30 Series Pulverizers ideal for leveling and
seedbed preparation.
Land Pride Soil Pulverizers aggressively rip into crusted
soils with reversible scarifier shanks. The full width
pulverizing roller features 3/8” x 1 1/4” heat treated steel
spikes with replaceable wear sleeves. The down pressure
springs keep the roller in constant contact with the soil
and the leveling H-beam redistributes freshly loosened
soil for an even seedbed.
Aggressive Scarifier Shanks
10 1/2” x 2” x 1/2” Scarifier shanks
aggressively rip crusted soils, enabling the
steel spiked roller to break down the soil to
a perfect consistency ready for planting.
Another helpful tool
in seedbed preparation.
• Cat. 1 hitch
• Single steel spiked roller with replaceable heat
treated sleeves
• Heavy wall round tubing on roller
• Self-aligning cast 1” bearings with double lip seals
• 10” Frame beam
• 1” Diameter shaft in roller
SP20
SERIES
25 - 35 HP — 60” 72”
SOIL pulveRIzeR
3/8” Steel spikes are welded to
the roller’s surface and feature
replaceable wear sleeves.
Which Pulverizer is right for you
MAxIMUM HORSEPOWER
20 30
SeRIeS SeRIeS
35 HP 50 HP
?
Steel Spikes — Be sure to look for wear sleeves which extend the life of your roller.
Are the steel spikes easily replaced? Ours are!
Spring loaded Roller — The spring loaded roller keeps the roller “pushing” towards
the ground for constant pulverizing action. Our springs are set at 32 lb./inch!
Scarifier Shanks — Too wide and they bulldoze, too narrow and they bend or break.
Just right when they are Land Pride! Ours are also reversible for twice the wear life.
Not All Pulverizers Are Created Equal!