Land Pride Soil Pulverizer SP20 Series - Manual (Page 2)

25
• Cat. 1 hitch
• Formed plate A-frame
• Heavy-duty clevis type lower hitch
• Single or double steel spiked roller
• Replaceable heat treated sleeves
• 3/8” steel spikes
• Self-aligning cast 1” bearings
with double lip seals
• 12” H-beam frame
• 1” Diameter shaft in roller
The 30 Series Pulverizer is available with
single or double spiked rollers to break
up tough soil conditions. The second
roller can also be easily added later with
no wasted parts.
SP30
SERIES
30 - 50 HP — 72” 84”
Soil Pulverizer Specifications
Model/Series
Hitch
H-Beam (mm)
A-Frame (mm)
Working Width (cm)
Weight - with single roller lb. (kg)
Max. Engine HP
Front to Back Length - single roller (cm)
Front to Back Length - double roller (cm)
Height (cm)
No. of Scarifier Shanks
Size of Scarifier Shanks
Shank Spacing (mm)
No. of Spikes - single roller
No. of Spikes - double roller
Spiked Roller Tube Diameter (mm)
Spike Material (mm)
Springs - Front Roller (kg/cm)
Springs - Rear Roller (kg/cm)
20 Series
Cat. 1
10" (254)
1 /2" x 2 1/2" Flat Bar (12.7 x 63.5)
60" (152) 72" (182)
491 (223) 561 (255)
35 HP
24" (60.9)
32" (81.3)
36 1/2" (92.7)
21 25
10 1/2" x 2" x 1/2" Reversible or,
10 1/2" x 1/2" x 1/2" Reversible
2 13/16" (71.44)
86 103
N/A N/A
5 9/16" O.D. (141.2)
32 lbs./inch (14.5/2.54)
N/A
30 Series
Cat. 1
12" (304.8)
3/8" Plate (9.5)
72" (182) 84" (213)
671 (305) 721 (328)
50 HP
27 1/4" (69.2)
35 1/4" (89.5)
36 1/2" (92.7)
25 29
10 1/2" x 2" x 1/2" Reversible or,
10 1/2" x 1/2" x 1/2" Reversible
2 13/16" (71.44)
103 116
206 232
6 5/8" O.D. (168.2)
(opt. 2nd roller 5 9/16" (141.2)
32 lbs./inch (14.5/2.54)
15 lbs/inch (6.8/2.54)
Maximum HP Rating based on 2WD specifications.
3/8" x 1-1/4" (9.5 x 28.5) Steel, replaceable heat treated sleeves
* See dealer for complete warranty information.
Models may or may not include options.
Design and specifications subject to change without notice.