Land Pride FD2548 - Manual (Page 12)

1/29/04
11
OPTIONS (CON’T.)
MOWER CHAIN KIT ASSEMBLY INSTRUCTIONS
Remove tractor 3-point hitch upper link pin (#1). Install
lift chains (#2) on outside surface of upper link mounting
plate on tractor. Reinstall link pin and keeper.
NOTE: Depending upon brand of tractor the link pin
may need to be replaced with a longer pin or a bolt. If a
pin is used its keeper must be a large enough size to
withstand side loads from the chain pull.
Attach the lower chain brackets (#3) and the tractor 3-
point hitch clevis (#4) to the mower lower links (#5).
Place lower chain brackets (#3) to the inside of the trac-
tor lower 3-point links. The 5/8" diameter lock pin (#6)
should be installed when using the leveling chains.
NOTE: Refer to "Leveling The Mower" on page 6.
10823