Linn 110 User Manual
Page 5
Levelling (spiked floor-stand mounting only)
The procedure for levelling each loudspeaker should be as follows:
●
Being careful not to scratch the cabinet, use a spirit level to check if it is
sitting level. If it is, gently rock the loudspeaker from front to back, side to
side and diagonally to check for any movement. If none is present and the
loudspeaker is sitting level, no adjustment to the spikes is necessary.
●
If the loudspeaker is not level, or moves when you rock it, loosen the
appropriate lock nuts using the tool provided (1) and use a screwdriver to
turn the spikes to adjust their height (2).
●
Press down firmly on the top of the loudspeaker to ensure it is in close
contact with your flooring.
●
Use the spirit level as before and continue to adjust the spikes as
required.
●
When the loudspeaker is level and does not rock, use the screwdriver to
hold the spike in place and tighten the lock nuts using the tool provided
(3).
Note:
To protect wooden or tiled floors, the spikes can be
placed on the floor-protectors, which are supplied
with the KOMPONENT spiked stands.
2
KOMPONENT 110, 106, 104
ADVANCED FEATURES
Installation
English
x4
x4
1
2
3