Land Pride AFM4014 - Manual (Page 15)

13
Section 1: Assembly and Set-up
7/28/06 AFM4011, AFM4014 and AFM4016 All Flex Grooming Mowers 315-160M
Land Pride
Table of Contents
Section 1:
Assembly and Set-up
13658
Transport fold Hydraulic Plumbing
Figure 1-1
Tractor Requirements
These mowers are designed for use with tractors having
540 rpm PTO speed. Also required is one dual ported
hydraulic remote. The PTO horse power rating should
not exceed 50 hp maximum for the 4011 model and 60
hp maximum for the 4014 and 4016 models.
NOTE: In order to maintain steering control, ballast
may need to be added to your tractor. To determine
whether or not to add the ballast, refer to your
tractor’s operator manual. This mower has a positive
transport tongue weight of approximately 450 lbs. on
the 4011; 540 lbs. on the 4014; 580 lbs. on the 4016.
!
CAUTION!
Do not over speed PTO or machine damage may result. This
mower is designed to be used with a tractor using a 540 rpm
rear PTO.
Hydraulic Plumbing
This mower is equipped with double acting cylinders for
folding, refer to Figure 1-1.