Land Pride AFM4014 - Manual (Page 24)

22
Section 4: Accessories
AFM4011, AFM4014 and AFM4016 All Flex Grooming Mowers 315-160M 7/28/06
Land Pride
Table of Contents
Ball Swivel Hitch
Refer to Figure 4-1
The ball swivel hitch clamps firmly to your tractor’s
drawbar. With this accessory the center deck can pivot
about the drawbar in all directions reducing twisting
torque and allowing the deck to mow a more evenly
height. Hillsides and uneven terrain are ideal for its use.
See you local Land Pride Dealer for the ball swivel hitch
accessory.
Ball Swivel Hitch
Figure 4-1
Cutting Blades
There are four blade choices to select from based upon
soil condition, density of grass, and tractor horsepower.
The appearance of the finish cut may vary between low
lift and high lift blades. See your Land Pride dealer for
blade availability.
Low Lift Blades
Land Pride’s low lift blades are designed for mowing over
sandy soil terrain where high suction lift is not crucial.
Sand sucked into the blades accelerates blade wear
more than normal. Low lift blades are recommended
because they produce a lower suction keeping sand
uplift and blade wear to a minimum.
Section 4: Accessories
Medium Lift Blades
Land Pride’s medium lift blades are great when
horsepower is a concern. They produces a medium
suction for lifting grass requiring less horsepower than
high lift blades.
High Lift Blades
Land Pride’s high lift blades develop the greatest suction
for lifting grass before cutting for that fresh clean cut look.
However, they may require more horsepower especially
when cutting tall dense grass. They are not
recommended for sandy soil conditions.
Mulching Blades
Land Pride’s mulching blades are designed to chop
leaves and/or grass into smaller parts leaving your lawn
looking fresher and cleaner than ever before.
Accessory Part Numbers
Blades are also offered in Kits for 3 units (27 blades).
See your Land Pride dealer for blade availability.
Land Pride All-Flex Mower Accessories
Part No. Part Description
Ball Swivel Hitch
315-370A Ball Swivel Hitch
Low Lift Blades Kit for 1 unit (9 blades)
315-172A AFM4011 (Kit)
315-262A AFM4014 (Kit)
315-259A AFM4016 (Kit)
Medium Lift Blades Kit for 1 unit (9 blades)
315-173A AFM4011 (Kit)
315-263A AFM4014 (Kit)
315-260A AFM4016 (Kit)
High Lift Blades Kit for 1 unit (9 blades)
315-174A AFM4011 (Kit)
315-264A AFM4014 (Kit)
315-261A AFM4016 (Kit)
Mulching Blades Kit for 1 unit (9 blades)
315-466A AFM4011 (Kit)
315-467A AFM4014 (Kit)
315-468A AFM4016 (Kit)