Land Pride AFM4014 User Manual
Page 38
36
Section 6: Specifications & Capacities
AFM4011, AFM4014 and AFM4016 All Flex Grooming Mowers 315-160M
7/28/06
Land Pride
Section 6:
Specifications & Capacities
Model 4011 Specification Drawing
12702
Model AFM4011 All-Flex Grooming Mower
Description
Specification / Capacity
Description
Specification / Capacity
Cutting Width 11’-1”
Blade Drive Belt 1 B-Section
Overall Width 11’ -3 1/2”
Drive Belt Tension Spring Loaded Idler with Overcenter
Release
Transport Height 6’ -5”
Blade Bearing Sealed Ball Bearings
Transport Width 5’- 6” With Lock Pins Installed
Blades
3 Each Per Deck
Medium Lift (1/4" x 2 1/2" x 16 7/8")
Optional Blades:
Low Lift, High Lift & Mulching
Overall Length 13’-0” Moving Position
10’-11” Transport Position
Blade Overlap 1 3/16"
Machine Weight 1,740 lbs.
Blade Spindle Speed 3,628 RPM
Hitch Pull Type with Adjustable Clevis and
Safety Tow Chain
Blade Tip Speed 16,020 F.P.M.
Tongue Support 2,200 lb. Capacity Screw Jack
Transport Tires (2) 18” x 9.5” - 8-Hi Flotation, Sealant,
4-Bolt Hubs & Tapered Bearings
Tractor Horsepower Minimum 30 HP / Maximum 65 HP
Deck Tires 13” x 5” -5 Air Tire, Sealant,
Roller Bearings
Gearbox Support 1/4” Steel Channel
Deck Wheel Spindles 1 1/4” w/Nylon Bushings
Gearboxes 540 RPM
(1)-Splitter & (3)-Wing
Deck Cylinders Dual Acting
Main Driveline (1) Category lII with Constant Velocity
Hydraulic Outlets 1 Set Required
Wing Drivelines (3) Category II with or without Slip
Clutch
Wing Flex 23 Degrees Left To Right
22 Degrees Front To Back
Cutting Height 1" to 5 1/2" (In 1/2” increments)
Center Deck Flex 13 Degrees Front To Back
Deck Size & Quantity 3 each / 48”
Wing Locks Automatic with Pull Rope Release
Deck Overlap 6 3/16”
Gauge Wheel Arms 1/4” Wall Square Tubing
Deck Thickness 10 ga.
Turning Radius Zero Turning Radius
Anti-Scalp Roller Front Center and
Outside Deck Corners
Mowing Cap acity
@ 2 mph
@4 mph
@ 6 mph
2.68 Acres
5.37 Acres
8.10 Acres