Replacing the keyboard – Lenovo 154 User Manual

Page 49

Advertising
background image

9. Install the new front fan assembly by aligning the new rubber mounts that came with the new front fan

assembly with the corresponding holes in the chassis, and then push the rubber mounts through the
holes. Then, carefully pull on the tips of the rubber mounts from the bottom until the new front fan
assembly is secured in place.

Figure 39. Installing the front fan assembly

10. Connect the new front fan assembly cable to the system fan connector on the system board. See

“Locating parts on the system board” on page 9.

11. Reinstall the heat sink fan duct. See Figure 26 “Installing the heat sink fan duct” on page 32.

12. Reinstall the hard disk drive. See “Replacing the hard disk drive” on page 35.

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the replacement, go to “Completing the parts replacement” on page 43.

Replacing the keyboard

Attention:
Do not open your computer or attempt any repair before reading and understanding the “Important safety information”
in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre
Safety and Warranty Guide, go to:
http://www.lenovo.com/support

This section provides instructions on how to replace the keyboard.

Chapter 2

.

Installing or replacing hardware

41

Advertising
This manual is related to the following products: