Replacing the mouse – Lenovo 154 User Manual

Page 50

Advertising
background image

To replace the keyboard, do the following:

1. Remove all media from the drives. Then, turn off all attached devices and the computer.

2. Disconnect all power cords from electrical outlets.

3. Disconnect the old keyboard cable from the computer.

4. Connect a new keyboard to the appropriate connector on the computer. Your keyboard might be

connected to a PS/2 keyboard connector

1

or a USB connector

2

. Depending on where you want

to connect your keyboard, see “Locating connectors, controls, and indicators on the front of your
computer” on page 6
or “Locating connectors and parts on the rear of your computer” on page 7.

Figure 40. Keyboard connectors

What to do next:

• To work with another piece of hardware, go to the appropriate section.

• To complete the replacement, go to “Completing the parts replacement” on page 43.

Replacing the mouse

Attention:
Do not open your computer or attempt any repair before reading and understanding the “Important safety information”
in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre
Safety and Warranty Guide, go to:
http://www.lenovo.com/support

This section provides instructions on how to replace the mouse.

To replace the mouse, do the following:

1. Remove all media from the drives. Then, turn off all attached devices and the computer.

2. Disconnect all power cords from electrical outlets.

3. Disconnect the old mouse cable from the computer.

42

ThinkCentre User Guide

Advertising
This manual is related to the following products: