LevelOne GSW-2401TX - Manual (Page 22)

16
Queues Priority
Entry:
Select “3” from Main Menu.
Purpose:
The switch can support priority either from tagged frame or based on
the input ports. This entry is for port-based priority, level 0 stand for the
lowest priority, level 7 as highest priority. Flow control will be disable if
priority level 7 was selected .
Default:
All ports are cleared to priority zero on power-up, or hardware reset.
Example : Set port 1 to priority level 7.
1.
input ‘1’ for select port
2. input ‘7’ priority level
3. type ‘E’ or ‘e’ back to main menu
Select :>> 3
which port ? (1 - 24 , E:Exit )...
1
Priority level ? (0 - 7 , E:Exit )...
7
which port ? (1 - 24 , E:Exit )...