Lennox Hearth LAYLO M1400 - Manual (Page 16)

16 Power Phone Up
2 Call Features
This section describes the basic features related
to calls.
Power Phone Up
• To turn your phone on, press the End key
and wait until the phone display lights up.
• To turn your phone off, press and hold the
End key until the phone plays a short
musical sound and turns off.
Make Phone Calls
Make sure you are in an area where a signal
can be received. Look for the signal strength
icon on the home screen. The more bars, the
stronger the signal. If there are no bars, move
to where the signal strength is better.
When the phone has been idle for a time, it
cycles into power save mode. Press any key to
return to normal operating mode.
There are several ways you can make a phone
call.
Call Using a Number
1. Enter a phone number.
2. Press the Send key.
Call Using a Contact
1. From View All, highlight a contact.
2. Press the Send key.
Call Using Voice Commands
You can use voice commands to call a contact
from your voice dial list or to dial a phone
number. For more information, see “Voice
Commands” on page 80.
Redial a Number
1. Press the Send key to open your call
history.
2. Highlight a phone number or contact and
press the Send key.
Note: To redial the last number called,
received or missed, press the Send key twice.
Answer Phone Calls
When a call comes in, the phone rings,
vibrates, or lights up. The phone number of the
caller also appears if it is not restricted. If the
number is stored in your contacts list, the
contact’s name appears. There are several
ways you can answer a phone call.
Answer Using Earpiece
Press the Send key.
Answer Using Speakerphone
Press the Speakerphone key.