Lennox Hearth LAYLO M1400 - Manual (Page 62)

62 Accessories
Voice Answer
Enable Voice Answer
You can set your phone to answer a call with
your voice when using a hands-free accessory.
1. From Auto-Answer, select Disabled.
2. From Ringer Mode, select Normal
Sounds.
3. From Headset Sounds, select Out of
headset.
4. From Voice Answer, select With
Accessory.
Answer Using Voice Answer
When you receive an incoming call, the phone
prompts “Incoming call, answer?”. With the
caller recognized as a contact entry in your
phone, the phone prompts “Incoming call from
(Name), answer?” Do one of the following:
•
Say “Yes” or press any key except the End
key to answer the call.
• Say “No” or press the End key to ignore
the call.
• Remain silent. The voice alert repeats twice
and the phone rings once before returning
to the home screen.
Use Voice Training
If your phone has trouble recognizing your
voice, you can train your phone to recognize
your voice specifically for numbers.
1. From Voice Training, read the message
and select OK > Train Numbers > OK.
2. Follow the prompts for each number until
training is complete.
Note: You must read the numbers digit by digit
for voice training to work.
Accessories
Set Headset Sounds
With a headset attached to your phone, you can
play the ringer through the headset or phone
speaker.
From Headset Sounds, select Out of phone
(ringing from the phone speaker) or Out of
headset (ringing from the headset).
Enable Auto-Answer
From Auto-Answer, select After 5 Seconds.
The phone automatically answers after five
seconds with a headset attached.
Set Com Port Speed
From Com Port Speed, select a data rate at
which your phone connects to a laptop or PC.
Check with your service provider for details.