Lenoxx Electronics PDV-709 - Manual (Page 21)

IB-PDV709-WM-E-061006
INITIAL SETTING
1
Press the SETUP button, a SETUP menu will
appear on the TV screen.
4
When the setup has been done, press the
SETUP button to exit the SETUP mode.
SYSTEM SETUP (TV SYSTEM, LCD MODE, TV TYPE & DEFAULT)
Setting the TV SYSTEM (only when you are using your TV to watch the picture).
- NTSC
A USA video standard. If your TV is NTSC system,
select this mode.
- AUTO
If the connected TV is multi-system, select this
mode. The output format will be in accordance
with the video signal of the disc.
When using the DVD player for the first time, you may need to set some of the settings and
adjustments according to your TV and favorite preferences.
You can get to the SETUP menu by following the below steps.
SYSTEM SETUP
TV SYSTEM
LCD MODE
TV TYPE
DEFAULT
EXIT SETUP
This allows you to set the aspect ratio of the LCD
screen.
Setting the LCD MODE
3
Press the OK button to confirm your selection.
2
Use the / / / direction buttons on the
DVD player or on the remote control to highlight
your selection.
SYSTEM SETUP
TV SYSTEM NTSC
AUTO
LCD MODE
TV TYPE
DEFAULT
EXIT SETUP
SYSTEM SETUP
TV SYSTEM
4:3
16:9 LCD MODE
TV TYPE
DEFAULT
EXIT SETUP
4:3
16:9
20
For TV or Portable Use
IB-PDV709-WM-E-061006.pmd 8/3/2006, 11:00 AM 21