Lincoln Electric Welding Robot Cell eCell - Manual

Power Source Dimensions Net
Product Product Input Current/Voltage/ H x W x D Weight
Name Number Power Duty Cycle Feeder/Torch Robot inches (mm) lbs. (kg)
eCell AD1222-10 230/460/575/3/60 Power Wave 355M 4-Roll Feeder ArcMate 80x90x60 2200
(20KVA Max) 350A/34V/60% 360 Amp A/C Torch 100iBe (2032x2286x1524) (998)
(300A/32V/100%) (100% CO2) (6 axis)
Description
Output Input
eCell ™
AUTOMATED SOLUTIONS
The eCell welding robot cell is a two-fixed table workstation designed for small to
medium sized parts that can be welded without reorientation. The layout is
optimized to maximize the work envelope of the robot, and is ideal for flexible
manufacturing systems allowing manufacturers to install multiple robots in close
proximity to save valuable floor space.
Shipped completely assembled and ready for immediate installation and production,
the eCell is designed to be an attractive and low cost alternative to labor intensive
arc welding.
Publication E10.120 8 /0 7
www.lincolnelectric.com
Advantage Lincoln
Recommended Options
Unit Includes
• Fanuc ® ArcMate ® 100iBe 6-axis robot
• Power Wave ® 355M power source
• Power Feed ® wire drive system (4-Roll)
• 360 Amp Air-Cooled Welding Torch
• Collision Guard - Torch Protection Software
• (2) - 24 X 24 in. (0.6 X 0.6 m) Precision Machined Tooling Plates
• Power Ream™ (Torch Reaming Station with Sprayer/Clipper)
• Fume Exhaust Environmental System
• Password Protection Software
• TorchMate 2 – Automatic Tool Center Point Adjustment Software
• PCMCIA 64MB Memory Card
• AccuTrak
® Payoff Kit
• Simple Fixturing Required
CV
3
PHASE
60
Hz
DC
TECHNICAL SPECIFICATIONS
• Simple to set-up, easy to operate.
• Four side fork-lift access.
• Pre-wired with one disconnect switch and fuse protection.
• Integrated user interface.
• 15 User inputs/outputs available.
• 115V 15 Amp auxiliary power receptacle.
• High speed digital communication featuring Arclink™.
• Complete metal surround flash and safety barrier.
• Multi-voltage, offering 230/460/575 Volts, 3-Phase.
• Work Zone: H x W x D = 41 x 30 x 39 in. (1.0 x 0.8 x 1.0 m)
• Manufactured under a quality system certified to ISO 9001
requirements and ISO 14001 environmental standards.
• ANSI/RIA 15.06-99, and compliant design.
Order
AD1222-10 eCell
CV-MIG Pulsed-MIG Flux-Cored Metal-Cored
Processes