Lincoln Electric Welding Robot Cell eCell - Manual (Page 2)

A CLOSER LOOK
• Compact Design
– 4’ X 8’ (1.2-2.4m) Base
– Four side fork-lift access
– Ideal for flexible manufacturing systems
– Conserves valuable floor space
– Can be transported via 1 ton pick-up truck
• Easy Installation
– Pre-wired with one disconnect switch / fuse box
• Quick Set Up
– Ready to Weld
– All accessories are included
– Just add wire, shielding gas and fixturing
• User Friendly
– Integrated user interface
– 115V auxiliary power
– 230/460/575 3-phase, 60 Hz
– Convenient lockable storage drawer
– 15 User inputs/outputs available
• High Performance
– Digital Communication - ArcLink™
– Waveform Control Technology™
– 4-Roll Wire Drive System
– 350 Amps 60% Duty Cycle Power Source
• Designed to Comply with:
– ANSI/RIA 15.06-99
• Manufactured under a quality system certified
to ISO 9001 requirements and ISO 14001
environmental standards.
FEATURES
T H E L I N C O L N E L E C T R I C C O M PA N Y
22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com
CUSTOMER ASSISTANCE POLICY
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the
needs of our customers and to exceed their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond
to our customers based on the best information in our possession at that time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability,
with respect to such information or advice. We expressly disclaim any warranty of any kind, including any warranty of fitness for any customer’s particular purpose, with respect to
such information or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such information or advice once it has
been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility
of the customer. Many variables beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
Power REAM Torch
Cleaning Station
(Option)
Order K2391-1
Compact design is
easy to transport and
set in place.
Features
Power Wave 355M
Digital Communication
Waveform Control Technology
®
Fume Exhaust Hood Assembly
Statiflex Filter Unit
(Option) Contact Lincoln Automation
for ordering.