Using the right bulbs, Lights – Lincoln MKT User Manual
Page 106
Examples of acceptable condensation are:
• Presence of thin mist (no streaks, drip marks or droplets)
• Fine mist covers less than 50% of the lens
Examples of unacceptable moisture (usually caused by a lamp water
leak) are:
• Water puddle inside the lamp
• Large water droplets, drip marks or streaks present on the interior of
the lens
Take your vehicle to dealer for service if any of the above conditions of
unacceptable moisture are present.
Using the right bulbs
Replacement bulbs are specified in the chart below. Headlamp bulbs must
be marked with an authorized “D.O.T.” for North America and an “E” for
Europe to ensure lamp performance, light brightness and pattern and safe
visibility. The correct bulbs will not damage the lamp assembly or void the
lamp assembly warranty and will provide quality bulb burn time.
Function
Number of bulbs
Trade
number
*Front turn lamp
2
PY24W SV+
*Front sidemarker lamp
N/A
LED
*Front park lamp
N/A
LED
*Headlamp
2
D3S HID
*Tail/brake/turn signal lamp
N/A
LED
*Rear sidemarker
N/A
LED
*Backup lamp
N/A
LED
License plate lamp
2
C5WL
*High-mount brake lamp
N/A
LED
Fog lamp (if equipped)
2
H11
*First row dome/map lamp
2
W5W
*Second row dome/map lamps
2
W5W
*Third row cargo lamp
1
211-2XB
Visor vanity lamp
2
37
To replace all instrument panel lights - see your authorized dealer.
*To replace these lamps - see your authorized dealer.
Lights
106
2010 MKT (mkt)
Owners Guide, 1st Printing
USA (fus)