Livescribe DESKTOP VERSION 1.2 - Manual (Page 14)

Getting Started with Livescribe Desktop
To begin using Livescribe Desktop, follow these steps:
1. Install Livescribe Desktop .
2. Run Livescribe Desktop .
3. Register your Pulse smartpen .
4. Learn about copying content from your Pulse smartpen .
5. Get to know Livescribe Desktop .
Installing Livescribe Desktop
If you have not already done so, install Livescribe™ Desktop on your computer.
Livescribe Desktop requires a PC running either Windows® XP SP2 or Windows
Vista® (32-bit or 64-bit). Your computer will also need:
• a 600 MHz CPU or higher
• 300 MB of free disk space
• available USB port
• Internet connection
To install Livescribe Desktop:
1. Verify that your computer meets the software and hardware requirements for
Livescribe Desktop.
2. Download the Livescribe Desktop installer from
http://www.livescribe.com/install .
3. Open the installer and follow the on-screen instructions to complete the
installation. During the installation, the installer will ask you to connect your
USB mobile charging cradle to your computer and dock your Pulse™
smartpen. In addition to installing Livescribe Desktop software, the installer
will install other required software and drivers.
Note: During installation, the Livescribe Desktop installer will link your Pulse
smartpen with one computer only. Be sure to download and install Livescribe
Page 6 Livescribe Desktop User Manual