Air handling parts – LG LW1500PR User Manual

Page 17

Advertising
background image

Service Manual 17

Disassembly

Figure 18

Figure 19

Figure 20

Figure 21

4. Air Guide and Turbo Fan

1. Remove the front grille. (Refer to section 1)

2. Remove the cabinet. (Refer to section 2)

3. Remove the control box. (Refer to section 3)

4. Remove the 4 screws that fasten the brace.

5. Remove the brace.

6. Remove the 2 screws that fasten the air guide

upper.

7. Remove the air guide upper.(See Figure 18)

8. Remove the 2 screws that fasten the evaporator.

9. Move the evaporator forward and pulling it upward

slightly. (See Figure 19)

10. Pull out the hook of orifice by pushing the tabs

and remove it. (See Figure 20)

11. Remove the clamp with a hand plier that secures

the turbo fan.

12. Remove the turbo fan.
13. Remove the 2 screws that fasten the air guide

from the base pan.

14. Move the air guide backward, and pull out from

the base pan.(Move the air giude lower carefully.)

15. Re-install the components by referring to the

removal procedure, above.

5. FAN

1. Remove the cabinet. (Refer to section 2)

2. Remove the brace (Refer to section 4)

3. Remove the 5 screws that fasten the condenser.

4. Move the condenser to the left carefully.

5. Remove the clamp that secures the fan.

6. Remove the fan. (See Figure 21)

7. Re-install by referring to the removal procedure.

Air Handling Parts

Advertising
This manual is related to the following products: