Locke FP-172-C - Manual (Page 3)

FP-100
T ABLE OF CONTENTS
SECTION
SECTION
Introduction 2
Dealer Preparation Check List 3 Operation 10
Safety Alert Symbols 4 Transporting 10
Safety Precautions 5 IV. MAINTENANCE
Federal Laws and Regulations 6 Maintenance Check List 12
I. INTRODUCTION & DESCRIPTION 7 Lubrication 12
Introduction 7 Spindle Belt Adjustment 13
Description 7 Spindle Belt Replacement 13
II. PREPARATION FOR USE 8 Blade Replacement 14
Attaching To Tractor 8 Blade Spindle Service 15
III. OPERATING INSTRUCTIONS 9 Troubleshooting 15
General Safety 9 Safety Decals 16
Cutting Height Adjustment 9 Torque Specifications 18
Spindle Service Instructions 19
RETAIL CUSTOMER’S RESPONSIBILITY
UNDER THE LOCKE TURF WARRANTY
It is the Retail Customer and/or Operator’s responsibility to read the Operator’s Manual, to
operate, lubricate, maintain and store the product in accordance with all instructions and
safety procedures. Failure of the operator to read the Operator’s Manual is a misuse of this
equipment.
It is the Retail Customer and/or Operator’s responsibility to inspect the product and to have
any part(s) repaired or replaced when continued operation would cause damage or exces-
sive wear to other parts or cause a safety hazard.
It is the Retail Customer’s responsibility to deliver the product to the authorized Locke Turf
Dealer, from whom he purchased it, for service or replacement of defective parts that are
covered by warranty. Repairs to be submitted for warranty consideration must be made
with-in forty-five (45) days of failure.
It is the Retail Customer’s responsibility for any cost incurred by the Dealer for traveling to
or hauling of the product for the purpose of performing a warranty obligation or inspection.
1