Lenoxx Electronics PDV-702 - Manual (Page 20)

IB-PDV702-WM-E-010807
INITIAL SETTING
Select the aspect ratio of the movie to match the
LCD screen and your TV set. There are three types
of screen sizes you may select.
Selecting the TV TYPE
16 X 9 Widescreen (16:9) - Choose this setting if your DVD Player is
connected to a WIDESCREEN TV. If you choose this setting and you
don’t have a widescreen TV, the images on the screen may appear
distorted due to vertical compression (faces may seem long and thin).
If you play a disc recorded in 4 X 3 format on a widescreen TV, the left
and right side of the screen will appear black. Press SETUP/SEARCH
button to change to 4:3 ratio or match the type of TV you have.
16X9 Widescreen
4X3 Standard
4X3 Letterbox
4 X 3 Letterbox (4:3 LB LETTER BOX) - Choose this setting if you
want to see movies in their original aspect ratio (width-to-height
ratio). You’ll see the entire frame of the movie, but it will take up a
smaller portion of the screen vertically. The movie will appear with
black bars at the top and bottom of the screen, but you will see every-
thing to the left & right of the center as in a movie theater.
4 X 3 Standard (4:3 PS PAN and SCAN) - Choose this setting if
you want to see movie fill the entire screen of your TV. This might
mean that parts of the picture (the left and right edges) won’t be
seen.
Most discs produced in a WIDESCREEN format can’t be cropped in
this fashion.
NOTE: If your DISC is not encoded to allow you to
change the aspect ratio, the TV display
cannot be changed.
SYSTEM SETUP
TV SYSTEM
LCD MODE
TV TYPE
DEFAULT
EXIT SETUP
4:3 LB
16:9
4:3 PS
Default - Resetting the functions to factory defaults
In case you cannot return the set to its normal
operation; you can reset the major options on
this set.
NOTE:
If you set “DEFAULT”, all items in the setup menu
will be reset to default setting.
SYSTEM SETUP
TV SYSTEM
RESTORE
LCD MODE
TV TYPE
DEFAULT
EXIT SETUP
NOTE: For 16:9 Widescreen TV TYPE, you need to adjust both
the LCD mode and the TV TYPE to 16:9 (see page 18 for Setting
the LCD MODE).
19
IB-PDV702-WM-E-010807.pmd 1/30/2007, 7:12 PM 20