C. using the rechargeable battery – Lenoxx Electronics PDV-702 User Manual

Page 8

Advertising
background image

IB-PDV702-WM-E-010807

Working conditions and precautions for the rechargeable battery

New batteries should be fully charged before initial use (about 5 hours).

Battery should be changed by an adult for safety.

Battery should only be used and charged when temperatures are between 32 -100

O

F.

Never put the battery in fire or water.

Do not expose the battery to high temperatures or store in hot, sunny places.

Do not short the battery terminals.

Do not open the battery.

When the battery is weak, the Low Power icon “

” will appear on the LCD screen and

then the power automatically turns off. If this occurs, please use the AC adaptor to
recharge the battery or play the set on AC power.

NOTE: When inserting the battery while the set is AC powered or car powered, there will be a

delay of several seconds before the LED lights up. This is because the battery charging
circuit needs to reset and detect the battery status.

2. The battery LED indicator will flash when the battery is charging and remain steadily on

when the battery is fully charged.

3. Charging time is about 5 hours. A fully charged battery delivers about 2.5 hours of viewing time.
4. To charge the battery using the supplied car adaptor, follow point B on the previous page.

C. Using the rechargeable battery

The rechargeable battery pack is suitable for portable use which allows you to enjoy the
unique functions of this unit outdoors.
Remember to charge the battery fully before initial use (about 5 hours).

Attaching the Battery

(refer to the diagram on the right)
1. Make sure the player is off and the AC adaptor or car

adaptor is disconnected.

Detaching the Battery

(refer to the diagram on the right)
1. Make sure the player is off and the AC adaptor

or car adaptor is disconnected.

2. Push the tab on the battery down.
3. Slide and lift the battery out.

To charge the battery

1. Insert the AC adaptor’s plug into the DC IN jack on the DVD player and connect the AC

adaptor to a wall outlet. After 5 seconds, the battery LED indicator will turn on and start to
flash.

2. Place the DVD player on a soft and smooth surface

with the bottom of the unit facing up.

3. With one hand on the DVD player to prevent it from

moving, take the battery and align the plastic tabs on the
battery with slots on the player, and slide it forward to
lock, The battery will click into place.

slot

SLIDE

3

2

tab

7

IB-PDV702-WM-E-010807.pmd

1/30/2007, 7:12 PM

8

Advertising