Adding engine oil, Maintenance and specifications – Lincoln 2011 Town Car User Manual

Page 238

Advertising
background image

5. Locate and carefully remove the
engine oil level dipstick.

6. Wipe the dipstick clean. Insert the dipstick fully, then remove it again.
• If the oil level is within this

range, the oil level is acceptable.
DO NOT ADD OIL.

• If the oil level is below this

mark, engine oil must be added
to raise the level within the
normal operating range.

• If required, add engine oil to the engine. Refer to Adding engine oil

in this chapter.

Do not overfill the engine

with oil. Oil levels above this
mark may cause engine
damage.
If the engine is
overfilled, some oil must be
removed from the engine by an authorized dealer.

7. Put the dipstick back in and ensure it is fully seated.
Adding engine oil
1. Check the engine oil. For instructions, refer to Checking the engine
oil
in this chapter.
2. If the engine oil level is not within the normal operating range, add
only certified engine oil of the recommended viscosity. Remove the
engine oil filler cap and use a funnel to pour the engine oil into the
opening.

Maintenance and Specifications

238

2011 Town Car (tow)
Owners Guide, 1st Printing
USA
(fus)

Advertising