La Crosse Technology WS-1913U-IT User Manual

Page 5

Advertising
background image

5

NOTE:
When changing batteries in any of the units, all units need to be reset by following the setting up
procedures. This is because the thermo-hygro sensor at start-up assigns a random security code and this
code must be received and stored by the Weather Center in the first several minutes of power being
supplied to it.

HOW TO INSTALL AND REPLACE THE BATTERIES INTO THE WEATHER STATION
The Weather Station works with 2 x C, IEC LR14 1.5V batteries. When the batteries need to be replaced,

the low battery symbol will appear on the LCD.

To install and replace the batteries, please follow the steps below:
1.

Remove the battery compartment cover.

2.

Insert the batteries observing the correct polarity (see the marking

in the battery compartment).

3.

Replace the battery cover.



HOW TO INSTALL AND REPLACE BATTERIES INTO THE RAIN SENSOR (OPTIONAL; SOLD
SEPERATELY)










1. Unlock the main cover from the rain sensor base and remove the cover.
2. Remove the battery cover at the top of the rain sensor.
3. Insert 2 x AAA IEC LR3 1.5V batteries into the battery compartment, observing the correct polarity.
4. Replace the battery cover and the main cover on the unit.

NOTE:
When changing batteries in any of the units, all units need to be reset by following the setting up
procedures. This is because the transmitter and rain sensor (optional) assign a random security code at
start-up and these codes must be received and stored by the Weather Station in the first 90 seconds of
power being supplied to it.

BATTERY CHANGE:
It is recommended to replace the batteries in all units regularly to ensure optimum accuracy of these units.
(For battery life information, see the Specifications section)


Please participate in the preservation of the environment. Return used batteries to an
authorised depot.
- Do Not Mix Old and New Batteries
- Do Not Mix Alkaline, Standard, or Rechargeable Batteries

NOTE:
The stored History record is lost when a battery change is completed on the weather station.


FUNCTION KEYS:

Weather Station:
The Weather Station has 4 easy-to-use function keys.





Figure 1

Figure 2

Figure 3

MIN/MAX key

SET key

+

key

HISTORY key

Advertising