La Crosse Technology WS-1913U-IT - Manual (Page 7)

7
** In normal display mode, user may press the SET key to toggle between Mode1 and Mode 2 display:
Mode 1: Wind speed, outdoor temperature, relative air pressure are shown.
Mode 2: Wind gust, dew point, and rainfall (optional) reading are shown.
Note: To view the rainfall data, press the + key after entering Mode 2 display.
MANUAL SETTINGS:
The following manual settings can be changed once the SET key is pressed and held for about 3 seconds:
 LCD contrast setting
 Manual time setting
 12/24 hour time display
 Calendar setting
 °C/ °F temperature unit setting
 Wind speed unit
 Rainfall unit setting
 Air pressure unit setting
 Relative pressure reference value setting
 Weather tendency threshold value
 Storm warning threshold value
LCD CONTRAST SETTING
The LCD contrast has 8 levels, from "LCD 1" to "LCD8" (default setting is LCD 5):
1. Press the SET key, the contrast level digit will flash.
2. Use the + or MIN/MAX key to adjust the level of contrast.
3. Confirm with the SET key and enter the MANUAL TIME SETTING.
Digit flashing
Wind speed icon
Outdoor temp
icon
Rel. Air Pressure icon
Wind gust icon
Dew point icon
In Mode 1, this reception icon is showing the condition of the reception of
the signal from Thermo-hygro transmitter
In Mode 2, this reception icon is showing the
condition of the reception of the signal from Rain
sensor (only if a rain sensor is being used).
Note: if no rain sensor is used, the reception icon
will always be displayed in Mode 2.
Rain icon