Land Pride Razor Pro ZRP52 User Manual

Page 25

Advertising
background image

23

Section 4 Maintenance and Lubrication

7/14/08

ZRP44 & ZRP52 Zero Turning Radius Mowers 356-117M

Land Pride

Table of Contents

NOTES:

1.

Initial oil change is after 5 hours of operation. Thereafter, change oil after every 40 hours of operation. Change
more often under dusty or dirty conditions and during hot weather periods.

2.

Torque initially and retorque after first 2 hours of operation.

3.

Perform initial hydraulic filter change after 50 hours (one week) of operation.

4.

Change engine oil filter per the engine manufacturer’s recommendations. Refer to Engine Owner’s Manual for
recommendations and other maintenance items.

5.

Service more often under dusty or dirty conditions. Use caution when servicing to prevent dust contamination in
the engine. Do not clean filter element. Replace with a new one.

6.

Inspect every 100 hours and replace if worn or cracking is noticed. Otherwise, replace every 1000 hours or 2
years
whichever comes first.

7.

Check fuel line hoses, fuel valve and grommet for any cracks or leaks.

8.

Refer to Engine Owner’s Manual.

Maintenance Schedule

Service at Intervals Indi-

cated

Weekly or

every 50 Hours

Monthly or

every 100 Hours

Annually or

every 500 Hours

Verify Safety Start Interlock System

Daily

Visually Inspect Unit for loose hardware
and/or damaged parts

Daily

Visually Inspect Tires

Daily

Check Oil Level, Engine (1)

Daily or every 4 hours

Clean Air Intake Screen (5)

Daily or every 4 hours

Clean Oil Heat Exchanger (5)

Daily or every 4 hours

Check Fuel Level

Daily

Blades - Sharpen & Securely Fastened

Daily

Discharge Chute - Securely In Place &
In Lowest Position

Daily

Replace Remote Air Cleaner paper
element (5)

As needed

Grease Deck Pusher Arms

X

Grease Pump Idler

X

Grease Deck Height Pivots

X

Grease Gauge Wheel Bearings

X

Change Engine Oil & Filter (1) (4)

X

Clean Cylinder And Head Fins (8)

X

Check Battery Connections

X

Check Tire Pressure With A Gauge

X

Check Hydraulic Oil Level

X

Clean Engine Exterior (8)

X

Clean And Re-gap Spark Plugs (8)

X

Check Pump Belt and Deck Belt
for Tension and Condition (6)

X

Check Fuel And Hydraulic Lines (7)

X

Check Fuel Valve And Grommet (7)

X

Tighten Lug Nuts On Wheels (2)

X

Change Fuel Filter

X

Clean or Replace Hydraulic Fill Cap

X

Change Hydraulic Filter And Oil (3)

X

Replace Spark Plugs

X

Advertising
This manual is related to the following products: