Land Pride Razor Pro ZRP52 - Manual (Page 37)

35
Section 5 Specifications and Capacities
7/14/08 ZRP44 & ZRP52 Zero Turning Radius Mowers 356-117M
Land Pride
Table of Contents
ACCESSORIES
Mulch Kit
Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces
handling of clippings, improves appearance, and recycles nutrients back to the soil.
Hydraulic Pump Drive V-belt drive from engine crankshaft
Ground Speed Forward Transport: 0-13 MPH (0-20.92 KPH)
Forward Mowing: 0-10 MPH (0-16.09 KPH)
Reverse Movement: 0-7 MPH (0-11.27 KPH)
Steering Type Twin lever steering provides independent control of each drive wheel.
Twin Lever Steering Controls Speed, forward, reverse, brake, and turns.
Steering Turning Radius True zero degree. Turns within its own length with counter-rotating independent drive wheels
Brake Service Hydrostatic dynamic braking
Parking Automotive-style drum brakes.
Integral park brakes are automatically engaged When steering levers are placed in neutral.
Mower Drive Single V-belt with electric clutch and spring tension idler pulley
Safety Features Operator presence system connected to deck and drive clutches.
Stabilizer rollers rear of tractor.
Seat Molded-vinyl seat with armrests and fore and aft adjustment.
Optional deluxe cushion seat
Mainframe Construction 1 1/2" x 2" x .1/8” rectangular steel tubing.
Drive Motor Mount .179” welded steel
Caster Wheels Mounted with roller bearings on each wheel.
Front Caster Forks .3/8” steel.
Deck Thickness 11 Gauge with 11 gauge doubler deck plate
Deck Trim Edges 1” x 3/8”
Deck Lift Foot-operated deck height adjustment.
Pin for setting height, transport position.
Hand Operated Controls choke, throttle, ignition switch, electric mower clutch and Integrated parking brakes.
Indicators Hour meter
engine warning light.
Cup Holder Two cup holders molded into the left side fuel tank.
Accommodates nearly any cup size including Big Gulp.
Cutting Heights Foot-operated deck height adjustment. Pin for setting height, transport position. Height
adjustment in 1/4" increments from 1 1/2” to 4 1/2”
Mowing Blades Heavy-duty, heat-treated, high-lift steel blades
.20" x 2 1/2" x 15.7" .20 x 2 1/2” x 18.3”
Blade Tip Speed 16,100 FPM 18, 300 FPM
Blade Drive Single V-belt drive to all three spindles with spring tension idler pulleys and electric clutch.
Spindles Machine aluminum housing, 1" diameter high carbon steel shafts and sealed ball bearings.
Flotation Suspended mower floats on four spring-assisted chains. 4 anti-scalp wheels are standard.
ZRP44 & ZRP52 Razor Pro Riding Mowers ( General Specifications)
ZRP44 ZRP52