La Crosse Technology WS-9037U-IT - Manual (Page 20)

38
ground to the second floor of the house. Should the unit be moved to a new
location, discard readings for the next 12-24 hours.
OUTDOOR TEMPERATURE/HUMIDITY DATA
The fourth LCD section shows the outdoor temperature and humidity, the
reception indicator, the transmitter identification number and the MIN/MAX
outdoor data.
TOGGLING AND RESETTING THE OUTDOOR DATA
1. To toggle between the outdoor current, MAX/MIN temperature and
humidity data and the times (for temperature data only) they were
recorded press the OUT/+ key:
Once to show the MAX outdoor temperature and humidity data with
the recorded time and date.
Twice to show the MIN outdoor temperature and humidity data with
the recorded time and date.
Three times to return to the current displayed values.
2. Once the MIN or MAX data is displayed, press and hold the SET key
for 3 seconds to reset the respective MIN or MAX record to current
temperature and humidity data, and current time, date display.
Note: The MIN or MAX data needs to be reset individually.
TO VIEW THE MIN/MAX DATA FROM DIFFERENT
TRANSMITTERS
When more than 1 transmitter used:
1. To toggle between transmitters, press the SNOOZE/CH key:
Once to show transmitter 2
Twice to show transmitter 3
Three times to return to transmitter 1
2. Use OUT/+ key to view the MIN/MAX temperature and humidity data
for the selected transmitter.
3. To reset the minimum and maximum temperature and humidity data,
and the times at which they were recorded, press the SET key
continuously for about 3 seconds. This will reset the MIN/MAX data
recorded to the current time, date, temperature and humidity. The
current time taken is the normal displayed time and does not regard
the time zone set for the unit.
Note: the MIN/MAX data for each transmitter needs to be reset separately.
Outdoor
temperature
in °C/ °F
Outdoor relative
humidity in RH%
Outdoor transmitter identification number MIN icon