Time zones – LogTag Recorders LogTag Analyzer Temperature Recorder User Manual
Page 112
112
LogTag Analyzer User Guide (2.0)
y
Year as last two digits, but with no leading zero for years less than 10.
yy
Year as last two digits, but with leading zero for years less than 10.
yyyy
Year represented by full four digits.
To customize how the time information is displayed, the following elements may be used.
If spaces are used to separate the elements, these spaces will appear in the same
location in the time displayed. The letters must be in uppercase or lowercase as shown in
the following table (for example, "ss", not "SS"). Characters that are enclosed in single
quotation marks will appear in the same location and unchanged in the time displayed.
Element
Meaning
h
Hours with no leading zero for single-digit hours; 12-hour clock.
hh
Hours with leading zero for single-digit hours; 12-hour clock.
H
Hours with no leading zero for single-digit hours; 24-hour clock.
HH
Hours with leading zero for single-digit hours; 24-hour clock.
m
Minutes with no leading zero for single-digit minutes.
mm
Minutes with leading zero for single-digit minutes.
s
Seconds with no leading zero for single-digit seconds.
ss
Seconds with leading zero for single-digit seconds.
t
One character time-marker string, such as A or P.
tt
Multi character time-marker string, such as AM or PM.
For example, if the date was 2 January 2004 and the date format was defined as "yy-M','
dd" (excluding the double quotes) the date would be displayed as "04-1, 02".
Time zones
The time zone of the computer used to configure a LogTag is stored in the LogTag's
memory. In some cases, the configuration time zone will be different from the time zone
at the download location. This allows you to select which time zone will be used to display
dates and times within the chart, summary and data displays. This option will not have
any effect on the original recorded data.
Download Time Zone All reading times are displayed in the time zone of the computer
used for downloading/displaying the data. This is the default
setting.