LogTag Recorders LogTag Analyzer Temperature Recorder - Manual (Page 126)

126 LogTag Analyzer User Guide (2.0)
Check Internet for update (see
"Getting updated software" on
page 138)...
This is a simple way of checking to see if there is a newer
version of this software available for download. This
command is explained in further detail in the chapter
" Getting updated software (on page 138)".
About LogTag Analyzer (see
"Finding your software version"
on page 140)... (
)
Display the version information about the LogTag
Analyzer software that you are using.
Toolbar commands
Each picture on the toolbar represents a unique command.
The pictures that are included on the toolbar represent the following commands:
This will bring up the LogTag Wizard, which will take you through the steps to retrieve
readings from connected LogTag(s) and prepare them for their next use.
This will display the file open window to allow you to locate and open LogTag files that
contain previously retrieved LogTag readings.
Save a copy of the LogTag data to a file on your disk drive.
Opens the window that will allow you to print a copy of the LogTag data to a printer.
Displays file properties about the currently selected open file.
Displays information about any digital signatures included in the currently selected
open file, which is also allows where new digital signatures can be added to the file
and where you can print a copy of the digital signatures.
Creates a new blank e-mail for sending a copy of the currently selected open file as an
attachment to a recipient of your choice.
Manually Uploads the currently active file to an FTP site or e-mails the file to a
pre-determined recipient list. This button image changes depending on the selected
automation settings, please see
Automatic e-mailing and uploading to FTP sites on
page 93.
Places a copy of the currently displayed information to the Windows clipboard so that
you can paste it into another Windows software package.