Lanier 2001 - Manual (Page 94)

RX Operation
4 - 34 Facsimile Programming
12
Enter the 4-digit Polling Password. This number is
set at the remote location and you must match it
when sending to them.
Note: Polling Passwords must be set at both
units and must match for Polling to work.
13
If you wish to poll more than one location, enter
that location. When you are done entering the data,
press START to enter the data into memory.
POLLING PW=_000
OK=YES (DEL=NO)
NO. 002=_
(Fin.=START)